Farmall & IHC Tractors Discussion Board |
Re: Cub radiator shroud
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Chris B. on March 29, 2003 at 18:07:18 from (66.94.219.150):
In Reply to: Cub radiator shroud posted by Jennifer Story on March 29, 2003 at 06:26:07:
I just did this a few days ago, so let me try and remember. Remove all the screws holding the shroud so that it is loose. Remove the nut on the backside of the fan. Set the shroud as far as you can so that you can slide the fan forward and up to straddle (inverted) the radiator inlet with the blades. The belts both come off with this cluster so don't forget them when you slap her back together. Also, don't overtighten the nut on the fan when you reassemble. I've seen and heard of lots of broken brackets, necessitating replacement of the timing cover.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|