'49 H water pump prices - pulleys, etc...

Posted by Brent on March 30, 2003 at 18:21:33 from (216.248.74.173):

Just finished building three-point and adding a 2-spool valve to my '49 H today. Went out with a rear blade and tried it out, worked great!

But....later when I went to grease the tractor, I was going to grease the water pump when I noticed a crack in the front pulley, then I notice the two springy things connected on the fan on the front were almost worn off (is there a pin in the center of each spring?), then I noticed there was some play in the water pump.

My questions: I checked in a mail-order catalog and a new pump with pully was $300!!! Then on the YT-Mag parts site, it was only $130, but didn't say if it had a pulley. When I pull the old pump, considering the cracked pulley and worn spring things I have, what parts do I need to make sure I order? And where can I get them resonably priced? Also, can you buy the little pieces of radiator hoses, or do I have to make them myself?

Thanks in advance!

Follow Ups:

• Re: '49 H water pump prices - pulleys, etc... Tim K. 21:40:44 03/30/03 (3)
  • Re: Re: '49 H water pump prices - pulleys, etc... Brent 04:06:06 03/31/03 (2)
    • Re: Re: Re: '49 H water pump prices - pulleys, etc... Tim K. 04:12:58 04/01/03 (0)
    • Re: Re: Re: '49 H water pump prices - pulleys, etc... jal-SD 06:59:01 03/31/03 (0)

Post A Followup Name: E-Mail: Subject: Re: '49 H water pump prices - pulleys, etc... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]