Farmall & IHC Tractors Discussion Board |
Re: 424 IH pto
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gary-Miss on April 07, 2003 at 12:14:31 from (152.163.189.203):
In Reply to: 424 IH pto posted by andy kohler on April 06, 2003 at 18:12:05:
I have a B-414 which has the same set-up as yours. You may just need to give it a little more adjustment since i will disengage under a load. The first step is the ground drive and the second step is the PTO drive. I had this problem a couple of years ago; One of the three bolts were broken that goes from the finger to the pressure plate. You can check this by taking theplate off under the clutchhousing and looking up through the hole. Get someone to bump the tractor over. Make certain is out of gear, etc. If you will E-mail me, I can check to see if you can change the bolt without splitting the tractor. I've still got the old pressure plate.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|