Farmall & IHC Tractors Discussion Board |
Re: Post Hole Digger on a Super A
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by mark on April 08, 2003 at 06:07:25 from (137.244.215.2):
In Reply to: Post Hole Digger on a Super A posted by Doug in WA on April 07, 2003 at 13:42:33:
I am in the process of converting a three point post hole digger into a single point hitch on my 140 (see three point adapter in the implement photo section). Since I don't own a welder I am having to deal with a welding shop that keeps very iregular hours. Plus the time I spend thinkging of ways to make this work. I am going back today to get a bracket changed that will work. I took the U shaped peice that connects to the lift arms and made a single peice that stands upright on the one point spear. I placed a bolt through this so it would swivel like your elbow. I then made a fork for the top to fit in the place where the U attached to the digger. I did not make the fork long enough the the digger bottoms out on the crotch before it reaches the full up. This should be a simple fix. I did hook the digger up and connected the PTO. with the full up and down the pto does not come near hitting anything on the tractor. You shold have no problem with using a three point system on your super A. I will try to post pictures when I get the bugs worked out. cheers mark
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|