Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Wondering what this part was used for on Fast Hitch as seen in old Farmall 350 brochure
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by karl f on April 14, 2003 at 01:31:57 from (65.237.15.15):
In Reply to: Re: Re: Wondering what this part was used for on Fast Hitch as seen in old Farmall 350 brochure posted by Ray in Pa. on April 13, 2003 at 20:10:53:
the stop contacts the button and pushes it in, which stops the hydraulic fluid flow, causing the pressure to build up, which makes the latch for the lever release and return it to neutral. if one were to push the button in without the depth control installed, the hitch could not be lowered until it was raised first. our 400 is missing it's depth control parts, but the button is still there on the cylinder. on our C there was a split collar with a plate on it that went around the cyl. shaft, and was secured in posisiton with a hose clamp that had a thumb screw. the plate would contact the button and thus limit the travel. when you buy equipment that has rebuilt/reconditioned cylinders on it, sometimes you will run into the IH fast hitch style with the button. -karl
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|