Farmall & IHC Tractors Discussion Board |
Re: Torq Amplifier question
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on May 10, 2003 at 13:27:08 from (64.228.11.114):
In Reply to: Torq Amplifier question posted by jeff muehring on May 10, 2003 at 05:33:34:
As Dick said it sounds as though you are in the low range now. what position is the TA lever while doing this free wheeling. Before you drive it again get a manual and adjust it precisely as manual says. If you don't have a manual, e mail me,I can type those directions. I don't like to do it that way as manual uses a diagram and letters to identify items. There is a remote chance there is nothing wrong but adjustment now. Wouldn't want to see you ruin one that's just out of adjustment. If you are going to e mail me on this take some measurments to tell me. First which position is TA lever in during the free wheel? How much free travel does the clutch have? When you start to engage the clutch pedal, the clutch shaft at end of linkage starts to move. Is the short linkage going to TA shaft adjusted so it imediately starts to move the TA shaft also? Lets start with that, and I can try to describe this for you from there. If you can find a manual so much better. Let me know how you make out.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|