Farmall & IHC Tractors Discussion Board |
Re: 806 with m+w sleeves
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Les Repair on May 18, 2003 at 06:00:27 from (67.0.81.157):
In Reply to: 806 with m+w sleeves posted by Dave on May 17, 2003 at 06:32:37:
I think what someone did was to bore the orignal 301 block to accept the 291 sleeves. This was a way to keep the 301 block. I think a way to solve your problem is to use the 291 sleeve and piston kit. These should fit your engine. M&W is not in the piston kit business anymore and their parts are hard to find. I did this same thing for customers many years ago after their block was bored to many times to be rebuilt. It made for a smaller engine, but most guys weren't after maximum power from these tractors anymore.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|