Farmall & IHC Tractors Discussion Board |
Re: 154 lowboy clutch adjustment
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John on May 18, 2003 at 19:12:35 from (192.233.162.101):
In Reply to: 154 lowboy clutch adjustment posted by Ag-man on May 18, 2003 at 05:27:05:
I don't have my manual in front of me but I think that the clutch petal should travel 1" before you feel any resistance. You adjust it by lengthing or shortening the clutch rod in the tunnel area. The grinding you hear may be due to the clutch brake not stopping the clutch from turning. Did you replace the 2 plastic parts that when the clutch is applied rub up against the clutch? That is adjusted by the adjustment bolt near the throw out bearing. Adjust it just enough to stop the clutch from spinning , the tighter the adjustment the faster the clutch will stop. If it is too tight, when you apply the clutch you will also stop the tractor (lock up the back wheels). I set mine just enough to stop the clutch from spinning after a few seconds after applying the clutch. If you feel that it is taking way too long for the clutch to stop, just tighten it up a little at a time.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|