Farmall & IHC Tractors Discussion Board |
Super A hydraulic Pump.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brian on July 01, 2003 at 20:48:18 from (65.49.176.184):
Greetings all, I was suspecting that my hydraulic pump was leaking hydraulic oil into the block and today I confirmed it. I took the pump off, and took it apart, it "looks" fine. The shaft leading to the drive gear seems in good condition, it spins freely but not lose. A couple of other things that I should mention is that when I lower the impliments, it really bogs the engine. I talked to my Case dealer about this and he said that the engine usually did bog when the impliments came down. The drive gear appears evenenly, but really worn. I was talking with a parts dealer down at Red Power Round Up ( Great Show ! ), he said that the front shaft may be worn. Can these pumps be rebuilt ? does anyone have any advice ? Thanks in advance.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|