Farmall & IHC Tractors Discussion Board |
Re: Re: Re: 3 Point for M
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brent in IA on July 08, 2003 at 06:33:28 from (129.186.243.110):
In Reply to: Re: Re: 3 Point for M posted by Pat Williams on July 03, 2003 at 11:09:47:
I posted pictures in "parts n pieces" gallery, and a few in the "tractor" gallery by mistake, until I found you can't post parts pictures there. Sorry! Just search for 1949 Farmall H. I used 3/8" steel for most of the fabrication, except where the cylinder attach, there I used 1/2". The 3 point arms are Cat. I arms from the farm store. I cut a third one in 1/2 and used each end to make the top link arms. I got some excellent adjustable turnbuckles for the arms at Olton Welding (http://www.oltonwelding.com) for about $15 each I think it was. They have lots of other useful parts too. The cylinders were a pair I had, 2" x 6", they can lift more than the front weight of the tractor can handle as I can lift it of the ground if I'm not careful!
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|