Farmall & IHC Tractors Discussion Board |
Re: Farmall 300 Hydraulics -- Quick Fix?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bill Cole/Rochester NY on July 22, 2003 at 15:30:44 from (66.66.153.26):
In Reply to: Farmall 300 Hydraulics -- Quick Fix? posted by Rock_Picker on July 22, 2003 at 10:29:05:
The seal on my 240U was installed wrong cause compression spring that holds ID of seal to shaft was off. My pump is a Cessna. I ended up grinding a chanfer on the edge of step that seal rides on so spring wouldn't pop off. And of course seal is pressed into ID of housing. I wet stoned where seal rides on shaft also but if yours has a worn groove where seal rides it will never seal. My 1hr quick fix turned into a 4hr rebuild of pump Worked so good that had to change suction hose cause pump vacumn collapsed it and had to lower relief valve setting. Hope this helps BC
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|