Farmall & IHC Tractors Discussion Board |
Re: Engine locked up on Cub
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Michael Soldan on October 19, 2003 at 10:18:21 from (216.46.130.46):
In Reply to: Engine locked up on Cub posted by Tyler on October 18, 2003 at 22:07:28:
Tyler, you didn't get a lot of response because you have done everything that any of us would have suggested. Don't try to turn the engine, but try to rock it back and forth so that if it does break free you can work the rust and corrosion up and down and eventually get it to the top. I have heard of jacking the rear of the tractor off of the ground and working the wheels back and forth eventually getting some movement in the pistons. Keep the penetrating oil on the pistons. My guess is that you had a good tight engine to begin with and hopefully you will get it free and it will not need a lot of work. There are lots of different penetrating fluids on the market, you may have to try a few. As for pounding on the pistons, don't over do it, you don't want rod damage, but a good jar will help. My best advice to you is to be patient, it took 5 years for the tractor to sieze up so a few weeks or months of penetrating oil is not out of reality. My son in law unsiezed a Massey 30 by soaking it with penetrating oil every time he walked by it and after about 6 months he rocked the rear wheel back and forth and it came loose...he had to put one new piston and a set of rings in it and it purrs..so patience, pennetrating oil and lots of luck...let us know how you make out.....Mike in Exeter Ontario
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|