Farmall & IHC Tractors Discussion Board |
Re: Uneven clutch release levers - '47 H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave in CT on January 19, 2004 at 12:58:35 from (204.60.63.96):
In Reply to: Uneven clutch release levers - '47 H posted by Dave in CT on January 19, 2004 at 11:01:07:
Checked the pins that hold the release levers and they all appear to be in place but, while doing this I noticed the 1/4"-clearance-release-lever bolt was loose. I tightened it up a bit and the tip came up to the release bearing. Does anyone have the torque setting for these release lever bolts? Also it appears they have an adjuting nut between the head of the bolt and the release lever. Is there a proper adjustment procedure for these release levers? I couldn't find anything in the IT or Blue Ribbon service manuals. After getting the release levers to their proper adjustment individually, I need to adjust the clutch pedal lever to give 3/16" clearance between the tips of the release levers and the release bearing. Since this is the first time I'll be doing this, I'd like someone to confirm this is the right way: Loosen the nut where the threads of the rod goes into the clutch pedal lever. Pull the cotter pin and the pin through the yoke at the other end of the rod. Spin the rod in or out to adjust. Put in the pin to the yoke and check the release levers' clearance. When it's 3/16", put back in the cotter pin and tighten the lock nut on the rod. Thanks, Dave
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|