Farmall & IHC Tractors Discussion Board |
Re: fARMALL200
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gary_N_WV on March 19, 2004 at 02:53:14 from (69.43.20.168):
In Reply to: fARMALL200 posted by James Williams on March 18, 2004 at 17:14:06:
James, I'm not sure about the 200, but I think you can get the proper seal for the pump at a Case/International dealer. As I said, I'm not familiar with the 200, but on my C I filled the pump with a little hyd. fluid so as to not run it un-lubricated, then I went to the point where the metal hydraulic lines bolt onto the Touch Control and filled the lines the best I could with Hyd. fluid. Then I cleaned the filter that is bolted into the side of the Touch Control Unit on the left side...then filled the Touch Control unit. Although I'm not sure, I would assume the hydraulics on your 200 would be about the same as on my C, but in any event I would think that if your system is full of fluid and your filter is clean, that your pump, no matter how worn it is, would pump a little....at least until you pumped all the fluid into the crankcase oil. Maybe someone will jump in here that is familiar with the 200. Sorry I can’t help you more. I just noticed that no one had answered your post and didn’t want you to think you were being ignored. Gary
Follow Ups:
Home
| Forums
Today's Featured Article -
New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|