Farmall & IHC Tractors Discussion Board |
Re: 706 hydraulics running a sprayer pump? Valve s
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on May 27, 2004 at 20:46:29 from (66.163.134.177):
In Reply to: 706 hydraulics running a sprayer pump? Valve shuts posted by andy on May 27, 2004 at 20:22:38:
You can tie the valve in position and run the pump, so long as the hydraulic fluid does not overheat. (Extended use on a HOT day might cause overheating of the oil.) The drive motors on some of the hydraulic driven centrifugal pumps have a built-in adjustment screw for pump speed. On the pump motors designed for an open center system, this does what you are proposing, and allows hydraulic oil flow to bypass the motor and return to the tractor. If the motor is so designed, the farther you turn the screw "in" (CW), the less oil is allowed to bypass, and the pump runs faster. On the motors of pumps designed for closed center systems, the adjustment screw is on the inlet line going into the motor, and the farther the screw is turned out (CCW), the more constant-pressure oil from the closed-center system is allowed to enter the pump motor, speeding it up.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|