Farmall & IHC Tractors Discussion Board |
Re: Re: farmall m leaks, misses, and sounds like c
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul in Mich on June 01, 2004 at 21:30:07 from (68.188.227.110):
In Reply to: Re: farmall m leaks, misses, and sounds like crap posted by Dave on June 01, 2004 at 19:15:30:
Jamie, I can't remember if you said that the tractor missed when you got it. If it did and the miss is constant, than it may be several things, a couple of which have been addressed by some of the others who responded to your post. One thing you mentioned is that you replaced the plugs, points, distributor or mag cap, but you assumed that the ignition wires were in good shape. You might replace the ignition wires, as a lot of replacement wires are carbon cored and not copper wire core. Believe me, your tractor will run better with copper solid core wires, especially if you have a magneto rather than a distributor. Since you have replaced everything else in the ignition system, my suggestion is that before you dig deeper such as manifold gaskets or sticking or burnt valves, you replace those wires. If it still misses, you won't have spent a lot of money, and it will be money well spent regardless of the outcome.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|