Farmall & IHC Tractors Discussion Board |
Removing and replacing a distributor on an H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave in CT on July 02, 2004 at 15:05:22 from (64.252.221.40):
I'm about to remove and replace a distributor on my H to check the advance mechanism's weights and springs. I've never done this before and can't find a breakdown of steps in the archives. The steps I'm planning to follow are: 1) Line the crank pulley TDC mark up with the timing pointer. 2) Mark a line on the distributor flange across over onto the housing it fits into. 3) Also mark where the rotor points to on the rim of of the distributor housing. 4) Undo the distributor clamps (the ones you loosten to adjust the timing) and pull the distributor out from the flange up. I've heard somewhere there's a slight rotation that happens upon removal because of the cant of the gears so . . . 5) Mark where the rotor points after I get the distributor out, to allow for this movement. And, of course, reverse steps to replace. Is this procedure correct? Any pointers? TIA
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|