Farmall & IHC Tractors Discussion Board |
Re: Re: Hitachi Alternator worked out GREAT on the
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Peabody on July 20, 2004 at 11:50:51 from (66.191.152.242):
In Reply to: Re: Hitachi Alternator worked out GREAT on the Sup posted by Bob Frey on July 20, 2004 at 06:54:44:
Found this post when searching the site: Posted by BIG JOHN on November 04, 2003 at 14:26:17 from (205.188.209.82): I see the Mike J is asking about this so thought it might just be time to put this on the board again. I have been putting this small alternator on several tractors, replacing generators under the hood. It is a Hitachi #14231 which was used on 1978-79 Nissan 620 pickup with a 2 liter engine and a 1980 Nissan 720 pickup with a 2 liter engine. At NAPA it is part #2138130 - cost is right at $50 + core. The alternator is 4 1/2" in Dia. and 7" in length and will go right on the orginal mountings on the tractor. Use an 8" x 3/8" bolt and some pipe for spacers. Being Hitachi means that it is METRIC. You will need to drill out the mountings to 3/8". The tension adjusting bolt is also metric thread. The alternator is a three (3) wire set up which can be converted to one (1) wire. There are spade conections labled S & L and a BAT post conection. The L spade is for the idot light and can be disregarded. Use a jumper wire from the S spade to the BAT post and you are good to go. The pully is a split type that you can widen using a spacer (once again metric). You will need to use a disc type lock washer and some locktite because there won't be room to reuse the split lock washer that comes with it. There is a built in regulator and a resister to keep the battery from feeding back to the alternator. This is a sweet fit under the hood that I have used on H's, M's and W models, also Cubs and many others. Hope this is of some help. GOOD LUCK
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|