Farmall & IHC Tractors Discussion Board |
Re: 856 key switch max amperage?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on August 18, 2004 at 05:25:15 from (165.170.128.65):
In Reply to: 856 key switch max amperage? posted by J. A. on August 17, 2004 at 18:58:21:
If the 856 key switch is like most tractors of it’s era, it’s probably good for 10 – 15 amps max. 20 amps continuous is a borderline overload. A better solution is to use a relay. Power the relay coil from the IGN or ACC key switch terminal. Run a #12 wire from the battery (or from the alternator side of the ammeter if you tractor has an ammeter) to one relay contact terminal. (For safety to provide a fuse in the line near the battery or ammeter connection.) Then run another #12 wire from the other relay contact terminal to the controller box. Now the key switch will see only a fraction of 1 amp from the relay coil – the relay will switch the control box power on and off with the key switch. (Added bonus: This setup will also provide slightly higher voltage to the controller box than the key switch can). For the relay suggest using a fog light relay or similar. These relays are readily available at any parts store, they will easily handle 20 amps and they are cheap!
Follow Ups:
Home
| Forums
Today's Featured Article -
A City Guy's First Tractor - by Fred Hambrecht. After living in apartments in Atlanta for more years than I care to remember, the wife and I decided to move to the country. Humming "Green Acres is the place for me..." we purchased a 29 acre tract about 60 miles south of Atlanta. Next came the house, I could talk about that ordeal for another two weeks... But, I want to talk about my tractor! We didn't even own a lawnmower, and all of a sudden we had enough grass to feed all the starving children of the bovine world. Naturally, I talked
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|