Farmall & IHC Tractors Discussion Board |
Re: Super C hydraulics troubleshooting
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave_Id on October 19, 2004 at 11:44:19 from (66.82.9.43):
In Reply to: Super C hydraulics troubleshooting posted by genep on October 19, 2004 at 11:02:33:
First, the ser. number should be on a tag on the right side of the tool box below the seat. I think I would drain the hydraulic res, and hoses, replace with IH Hytrans to the hole. Leave the levers in the rear position, and activate the touch control valves back and forth a doz times to bleed the sysem. Top off the reservior and do this again. If the hitch still won't lower or raise, remove the pump, and check to make sure it has a woodruff key. Take the pump apart and replace the orings. If it still doesn't work, then you may need to rebuild the cylinder. Not a real tough job, but one where you'll need proper diagrams, and take maticulous care to keep all the parts in order... Good luck
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|