Farmall & IHC Tractors Discussion Board |
Re: Magnet strength
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ed Topel on December 16, 2004 at 20:59:41 from (205.188.117.13):
In Reply to: Magnet strength posted by Loon Yi on December 16, 2004 at 18:28:24:
I once recharged an F4 magnet using a block of cast iron about 40 lbs.as the keeper. After recharging I put the block on a scale and watched the scale as I lifted the block by the magnet. The scale was reading about 15lbs when the magnet broke free so I took it to be 25lbs. pull. I put the magnet back on the block and tried again and only got 15lbs. pull. I guess this is why you should slide the keeper off the magnet and not pull it straight off after charging. Probably about 6 years ago I posted instuctions for winding wire around the magnet and using a battery to energize it but I can't find it in the archives.I think I still have the sketch I made to show how to wind the wire to get the correct polarity, I could e-mail that to you.Ed
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|