Farmall & IHC Tractors Discussion Board |
Re: Regular side draft carb
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by James Herrman on March 07, 2005 at 20:21:41 from (66.249.51.189):
In Reply to: Re: Regular side draft carb posted by Kevin (LA-CA) on March 07, 2005 at 17:35:27:
THANKS to the answers on my post. I appreciate the comments. I know that I blew thru the carb after the float assembly was in, but can not remember if it was completely assembled, and the needle and seat did work. Am not sure it I rechecked after it was completely assembled. As you say, the needle could have fallen out. Perhaps I have the float set incorrectly?????? When I took it apart, it seems as if the float did not have a lot of travel, so I increased the travel of it, made it open more. Maybe that is the problem?????? I am going to remove it again and before I do anything to it, I will check to see if the needle is still in place by the "blowing method". I know that it took me 3 times on my F20, but I finally got it!!!!!!!!!!! Does anyone offer a kit for the carb????? You might have hit the nail on the head when you mentioned the gasket fit between the mixing float bowl and the stem/nut that holds the cover on, because it seems like the bowl will not fill enough to float the "float". I thought that the float was centered, but again not can swear on it. Also, I do think that maybe some of the vent holes might be leaking??????? Thanks again. JIM
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|