Farmall & IHC Tractors Discussion Board |
7130 RPM TROUBLE
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Sprowcow on March 30, 2005 at 21:07:41 from (4.225.5.131):
I own a 1991 7130 magnum with mfd. I bought the tractor with 3000hrs on it. We have a dairy farm so we do a lot of pto work with it. The first thing we did was put it on our chopper. The tractor would only run about 975 on the 1000 shaft. Silage would only go half way back wagon. The engine pulls down to 960 with just the chopper running, no load. I took the pump and injectors off sent them to the pump shop. Told him troubles. He adjusted governor, checked injectors. Tractor now runs 2500 rpm's which is just 1000. The governor is really touchy now, engine flutters a little bit when you push the throttle ahead but comes out of it right a way. Still under light load the tractor will not hold rpm's. Took it to dealer put it on dyno, 210 hp at 1000. If you drive the tractor down the road it will only make 2350rpm's. The tractor is fine doing field work, set the throttle at 1900 rpm's and grab gears. This tractor also consumes lots of fuel. 11 gallon an hour running lagoon agitator. 1977 1086 uses 5 gallon an hour. Has anybody else had this problem? Does anybody have any suggestions? Thanks for your time.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|