Farmall & IHC Tractors Discussion Board |
Re: electrical charging question on '41 H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John T on September 18, 2005 at 07:43:58 from (66.244.90.98):
In Reply to: electrical charging question on '41 H posted by awutay on September 17, 2005 at 15:34:40:
Awutay, let me know if you have a 2 wire cutout relay system or a full fledged 3 wire Voltage Regulator and I will post a Troubleshooting Procedure for non charging. Regardless what came original, many got converted so I cant say fer sure what you now have. A Cutout Relay is a smaller 2 wire device usually Generator mounted that has a BAT terminal wired to the ammeter and the GEN (or ARM) terminal wired to the Gens Armature post. On those systems the Gens Field post is wired to the switch. A 3 wire Voltage Regulator has 3 terminals BAT ARM (or GEN) and FLD. BAT on VR wires to the ammeter,,,,,,,,,GEN (or ARM) on VR wires to Gens Armature post,,,,,,,,,,FLD on VR wires to Gens Field post. I could post a long winded trouleshooting procedure for either (VR or cutout relay), but its easier and more understandable if you let me know which system you have. John T Nordhoff in Indiana, retired electrical engineer
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|