Farmall & IHC Tractors Discussion Board |
Farmall H carb idle stop screw and idle adjustment
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John in Ct on September 28, 2005 at 16:03:35 from (69.24.45.18):
I am rebuilding a carb for my H (see previous post) and at the same time I have one on my H. I am having trouble adjusting the low idle stop screw and low idle adjusting screw. I try to get it to idle to 450 rpm and only can get it to about 700 rpm. I have the idle adjusting screw about 1 turn out. I find that as I back the idle stop screw out to turn the rpms down, I have to turn (richen) the idle adjusting screw in. I am afraid that to get it to idle near 450 I will have to have the idle adjusting screw all of the way in. It has a high speed idle of 1840-1850 rpms. Also, I rebuilt the carb with everything except a new throttle shaft bushing. I can shake the shaft very little but I am sure it has more than the .001" play but it isn't real sloppy. I will rebush it along with my other carb. Thanks!!
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|