Farmall & IHC Tractors Discussion Board |
Re: My tune up went down hill. 1945 Farmall A
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by El Toro on October 19, 2005 at 18:49:37 from (205.188.117.73):
In Reply to: Re: My tune up went down hill. 1945 Farmall A posted by Philip in Maine on October 19, 2005 at 17:23:19:
It looks to be a mag. Did you pull this mag off the tractor to install the new points and condenser? If you did you may not have installed the mag in time with No1 piston. Set your point gap at .013" and reinstall rotor and cap. Remove the wire from center of the cap and hold it within a 1/4" of the mag frame. Have someone turn the mag over using the lugs that are sticking out. There should be a post for the impulse coupling to contact and it will be a little difficult to turn and do this several times and see if you have any spark from that coil wire. You will need to watch that very closely to see the fire. Post back what you find. Hal
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|