Farmall & IHC Tractors Discussion Board |
Never seen such a thing
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by scott#2 on December 11, 2005 at 11:45:51 from (138.88.107.47):
I'm in the middle of restoring this SA and am putting it back together. Rebuilt just about everything including the touch control block. I went out to the shop this morning and saw hydraulic fluid on the floor dripping from the touch control block, cleaned it all up and off the tractor too so I could see where its leaking from. Seems, or so I thought it's coming from the filter flange, that long screen held in with 4 bolts. After cleaning it up and wipeing it with my finger to check for fluid, I found it's coming from the fill plug. So I tightened it up real good and left for the day. When I came back, it's leaking from the fill plug again. Can't tighten that N.P.T. plug anymore and the fluid is well below the threads on the block. If I leave the plug out, it doesn't leak. I didn't know hyd. fluid could climb! Any ideas out there? Teflon tape?, Pipe dope? scott#2
Replies:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|