Farmall & IHC Tractors Discussion Board |
Re: Ok I am jumping into this 706 w/ both feet.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on January 04, 2006 at 18:44:12 from (4.124.76.79):
In Reply to: Re: Ok I am jumping into this 706 w/ both feet. posted by K.B.-826 on January 04, 2006 at 17:55:50:
Yep , i would pull the engine and KB ya can place a short 4x4 under the fuel tank support and that will give ya enough room but ya have to remove the four bolts on the tank support and the two bolts that hold it to the steering support . But since it is best to do and out of frame on them Cut two wedges and drive them into the ft axel support and block the rear under the bellhouseing and use a set of spliting stands that roll and wheel it away then support the engine with a cherry picker and remove the stands and remove the left frame rail . If you do roll the engine away from the chassie make sure that you leave a bolt in the top and bottom of the frame rail on each side to support the rear of the engine. And always remember that it is only a tractor and not rocket sicense Bigger heavier so Please be safe think before you do and mark the Hdy oil cooler lines and make sure that they go back on the way they came off.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|