Farmall & IHC Tractors Discussion Board |
Re: Fire Crater pistons in M
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Jason Simmerman on January 24, 2006 at 09:12:25 from (214.3.140.16):
In Reply to: Re: Fire Crater pistons in M posted by Janicholson on January 24, 2006 at 07:09:23:
The way we have done SBC motors and LS motors is we reuse an old head gasket and put playdough (modelling clay) on the piston dome. Using the old headgasket is already crushed to spec. Torque the heads to spec and install rockers and pushrods to spec. Turn the motor over BY HAND and take readings. You should have about .020 - .025 clearance to be safe if the clearance is that tight. If the valves hit the pistons, you can flycut them.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|