Farmall & IHC Tractors Discussion Board |
656 Hydraulic Problem continued
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Don, Ohio on February 02, 2006 at 20:15:01 from (24.166.215.47):
I posted my hydraulic problem about a month ago. I lost all hydraulic functions on the tractor instantly including the power steering. I want to thank everyone for their responses. The problem was/is that the splined hub in the pressure plate sheared off its rivets. Since then, I have split the tractor apart and I am in the process of replacing the pressure plate and the clutch. I have a few questions about that. I have also removed the flywheel and I am looking for a new one or a better shape used one since mine has been turned down as far as the manual says is allowable. When putting the flywheel back on, should the bolts be loctited on or have something to keep them from vibrating loose? The bolts appeared to have some type of material on them when I removed them -- it was light gray in color. The bolts were really tough to break loose, so I think they may have had some kind of loctite on them. Another question. The clutch shaft which is now accessible in the clutch housing, this shaft easily pulls out. I only pulled it a little way out, because I didn't know if it would mess anything up if I tried to pull it all the way out or if there is something in there that keeps it from coming all the way out. Is this normal? Should you be able to move this shaft? I am surprised that it didn't get pulled out when I was splitting the tractor apart. Thanks, Don
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|