Farmall & IHC Tractors Discussion Board |
Re: Note for Old Dutch 656 ring gear
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Janicholson on February 11, 2006 at 10:19:43 from (66.173.50.183):
In Reply to: Note for Old Dutch 656 ring gear posted by Yellott Canby on February 11, 2006 at 09:50:19:
Dear Yellott, My Idea From past posts might solve the issue without grinding the starter. Look to be sure that the starter has no centering ring (machined surface at the mounting hole. If it does, neither way will work.=, and grinding the ID of the starter hole is not advised. Grinding (or lathe turning the starter nose would be better. If the location of the starter is primarily the bolts, put the starter in the hole and tighten it in without shims. Mark the bolt head, that is easiest to get to, with an arrow pointing directly away from the flywheel. Remove this bolt and grind 1/3 of the shank of the bolt away so it is reduced in diameter only on the side where the arrow is pointing, and only from the head of the bolt to the depth of the starter flange. This will allow the starter to be mounted flat, and be moved away from the ring gear by about 1/16". That should make the tooth clearance happy. JimN
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|