Farmall & IHC Tractors Discussion Board |
Re: Super C loader questions
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by smt138 on February 16, 2006 at 10:47:19 from (65.30.57.56):
In Reply to: Re: Super C loader questions posted by Nat 2 on February 16, 2006 at 05:02:59:
Thanks for all your help. I think I have it figured out. The new hydraulic lines on the tractor are identical in every way to the stock ones with the exception that the high pressure line feeds to the lift valve control instead of returning to the tractor cylinders. So what I think will work is as follows. High pressure from tractor pump to valve control with a return to the external resevoir. Return the overflow from the external resevoir to the tractor resevoir by running a line from the gravity port on the resoivoir to the pluged port on the housing of the tractor's line (suction side) which will restore flow to the tractor's hydraulics. From the loader's control valve, I run one line to the "T" which supplies the loader's cylinders. That sounds logical to me and I think it is the same approach you have laid out. The only question I have is if I am correct that by removing the plug on the housing and installing the line as described that that will return the fluid to the cylinder?
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|