Farmall Tractors Discussion Board |
Re: General question on seals and gaskets
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Les on January 12, 2000 at 04:26:46 from (206.155.220.82):
In Reply to: General question on seals and gaskets posted by Jim on January 11, 2000 at 18:51:33:
Jim: If you look at a removed seal and most generally the IPB for the tractor will show the part number for a seal with a "D" following the number. the "D" indicates double. The old leather seals while doing an excellant job of sealing did it with two seals stacked. When I take a seal PN with a "D" to NAPA I get a box with two seals and instructions on how to place the seals in relation to each other. taking the same PN to my local Case/IH dealer I get one thin seal costing more than the NAPA two. I discovered this while I was trying to find a PTO seal for my H, the seal from IH looked so puny that I decided to try to do better. I took the same PN to NAPA and came away happy. I have since replaced all seals in the rear of my Super A, same deal.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|