Farmall & IHC Tractors Discussion Board |
Stuck engine idea is this crazy or could it work?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by River Bottom Farmer on June 19, 2006 at 18:35:02 from (152.163.100.65):
I recently sold Tom Windsor a stuck H engine complete with head when he was returning home from the RPRU.I had been soaking the cylinders off and on for a while on it and thought that this might work.I would leave the head on it and take the rocker shaft off and make sure all the valves are closed.Next I would pull the crank out and put the engine on an engine stand and set it right side up so the rods are hanging straight down.Now you need to put together an adaptor to fit into the sparkplug holes with a grease fitting on the end.You need to place something soft like a wadded up tarp or an old blanket under the block just in case a rod pops out under pressure.I would pump it full off grease one cylinder at a time and apply moderate pressure because Im not sure if this could damage the liners if they are salvagable.Essential this should work just like a press.Any pressure you put on top of the piston will be multiply by the square inch of surface on the piston.Is this a crazy idea or could this be a possble solution for a lot of stuck engines.P.S. I would use the cheapest grease available cause cylinders with the piston stuck on the bottom of the stroke will take alot of grease.Maybe filling the cylinder with oil first then pressurizing with grease next might be another solution.Im am interested in the responses this will get.Look forward to hearinf from all of you....River Bottom Farmer
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|