Farmall & IHC Tractors Discussion Board |
Re: Farmall H carb and tires
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by todd in michigan on July 08, 2006 at 19:12:38 from (24.247.247.179):
In Reply to: Farmall H carb and tires posted by H fanatic on July 08, 2006 at 15:00:51:
You need a good set of manuals. you can start here and download the parts manual here free. THe idle jet small screw with a spring towards the top and the main jet is the big screw at the bottom with the spring. A good starting point of reference for your carb is "The idle mixture screw (idle jet)is set at 1 1/2 turns out. The load mixture screw (main jet) is set at 3 turns out." so tighten your jets down slowly and count how many turns to get to the bottom and then see how far off the reference point you are. 3 turns out is a starting point, fine tune from there.
Replies:
Home
| Forums
Today's Featured Article -
Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|