Farmall & IHC Tractors Discussion Board |
Re: Unleaded gas or use a lead additive for new en
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by John In Iowa on August 30, 2006 at 09:31:50 from (12.152.205.44):
In Reply to: Unleaded gas or use a lead additive for new engine posted by scott#2 on August 30, 2006 at 05:23:13:
Being a shade tree mechanic myself and working for a petroleum pipeline at a loading and pumping terminal I have seen the phase out of lead out of gasoline and seeing the phase out of sulfur out of fuel oil. The biggest problems that came out of Nolead gasoline were deposits buildup on the intake valves in test engines. Because of this Nolead gasoline in the US cannot be sold without a detergent additive to reduce Intake Valve deposits in it. The other problems that I seen on my own tractor is the lack of octane in Nolead. I have a Farmall 400 that is a working tractor. With step pistons and with the lack of octane of regular Nolead it will ping a lot when a load is put on it. Regular Nolead has an octane above 87. The old leaded Regular had an octane above 89 and those two points does make difference. Running Gasohol, which is a 10% blend of gasoline and ethanol, rises the octane two points and the 400 runs a lot better and pulls better. The trade off is that you got to use fresh fuel, if you let it set a fuel barrel for long period of time the ethanol will gather moisture and will fall out of the gasoline to the bottom and once you pump that into your fuel tank it will make a one heck of a mess. Also when parking the tractor for a long period of time you need to drain the carburetor. It rust and set up and make another mess. I do use a lead substitute - CD2 that is a detergent base additive. As hard as I work my tractor it can’t hurt. John In Iowa
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|