Farmall & IHC Tractors Discussion Board |
Re: Need Help on New Idea Loader
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Janicholson on September 06, 2006 at 13:26:01 from (199.17.6.122):
In Reply to: Need Help on New Idea Loader posted by Triker on September 06, 2006 at 12:42:22:
The cylinders need to be connected to the belly pump either with a "T" going into the connection shown to now be connected to a rear remote. A shutoff valve, or diverter valve could be used to shut off rear hydraulics while using the loader. The other way is to use the port on the front left and the port on the right to attach the loader lift hoses to. Oil might come out of the top of the cylinders if the top of the cylinders were being used as a resivoir to increase the volume in the belly pump. The top ports (if any) get connected to either the filler pipe with a new "T" there, or into the drain of the belly pump with a "T" there. compressing the cylinder when connected and the control rod is all the way forward should collapse the cylinder if cannected as above. Good luck. JimN
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|