Farmall & IHC Tractors Discussion Board |
Re: no spark on h
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bob on October 11, 2006 at 09:07:23 from (69.178.229.154):
In Reply to: Re: no spark on h posted by Bob on October 11, 2006 at 08:42:19:
P. S.... The first thing I would do is to clean the points by drawing a clean piece of white cardstock through the closed points several times, followed by spraying any remaining debris off of the contact faces, using electrical contact cleaner, and allowing it to air-dry. If you follow the directions in the manual I linked, and take out 3 screws holding the complete rotor drive to the mag, and remove it as a unit, nothing can get out of time, as the mag shaft is "D"-shaped, and the complete rotor drive will only go back on the mag one way. DO NOT remove the little cover right next to the rotor, which is held on with 2 screws, or you will wind up with the rotor shaft/gear out, and out of time. Not TOO serious, though, as there are timing marks on the gear teeth, as shown in the manual.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|