Farmall & IHC Tractors Discussion Board |
Re: I foudn a tractor with my wheels on it.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by El Toro on November 02, 2006 at 10:21:27 from (205.188.116.133):
In Reply to: I foudn a tractor with my wheels on it. posted by Mike CA on October 30, 2006 at 00:04:01:
Hi Mike, You mentioned in one of your early posting's that you didn't have a workbench. Here's a plan that I found that looks similar to my work bench I made 40 years ago. I used heavier lumber than the bench shown. I took the dimensions from my bench. I have 2 vices and a grinder bolted to the bench, very handy when you need them. This is the lumber list that I used. Hal A. 4X4X36" legs 36"long 4ea. B. 2X6X331/4" 2ea. C. 2X6X721/4" 2ea. D. 2X4X691/4" 2ea. Note: I installed a shelf 15" above the floor using these 2x4's nailed to inside of the 4X4 legs. Used 1/2 plywood for the shelf. Cut to size E. I didn't use E on my bench. F. Top 3/4" plywood 36"wX721/4" long. Assembly: a. Nail (B) across the 2 (A)'s flush w/top. Do the same w/the other (B) and (A)'s. b. Nail (C) to (A) front and back. c. Install (D) inside the legs (A) lengthwise 15" above the floor. It's handy for storing. d. Install 3/4" plywood on top. I only used small galvanized nails on the top since it will become worn with use. Then I removed it and flipped it over with the unused side up. You can get new wood scraps at Home Depot. I would buy good lumber. I think my legs are maple, but you could use fir or something similar. I have even set engines on my bench.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|