Farmall & IHC Tractors Discussion Board |
couple of question about 39 M transmistion
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Paul G. in Mn on November 26, 2006 at 15:22:16 from (206.183.177.245):
this weekend I went through the transmition on my 39 M. I took everything out and checked all the bearings and replace all the seals. I removed the seal from the lower shaft that drives the lift all pump and the original had 2 differet seals there. The parts book only shows 1 seal there. Should there be a second seal there?. This transmition sat for a long time and the gears that were out of the oil have some rust on them. Should I be concered about that? any way to clean them or will this come off in time? This was the first one of these I have gone through, wasnt bad if you do it in the right sequence( hated repulling the axles and bull gears again) Just glad its done
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|