Farmall & IHC Tractors Discussion Board |
Re: Bought a cub....need help
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Bob G. on February 06, 2000 at 17:24:10 from (152.163.204.72):
In Reply to: Bought a cub....need help posted by Bill B on February 06, 2000 at 11:36:33:
You don't have to pull the crank to replace the rear main oil seal but you do have to split the tractor. The rear main is a lip seal, and is a round circle and it sets in a retainer, that is bolted on the back of the engine block. You must remove the engine,clutch, and flywheel then remove the bearing retainer. As for the gear box, you already have the engine out its time for some exploritory sergery. Just a guess but the front cluster bearing sounds like a suspect to to me. Don't make much difference though has to be looked at. Steering,,not a expert still working on my first Cub restoration but I don't see too much for adjusting in the shop manual. There is some shims at the tie rod end of the steering arm but won't help if the slop is in the gear.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|