|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Hydralic Load Installation on 574 Int
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by LTF in NC on February 25, 2000 at 16:55:44 from (206.228.213.171):
In Reply to: Re: Re: Hydralic Load Installation on 574 Int posted by Bob D on February 25, 2000 at 12:00:32:
Bob, the setup is rather straight forward. The loader is mounted using a substantial formed bracket that mounts to each side of the engine and to the area on each side of what constitutes a bell housing. This is not a fast attach loader but it is pinned and can be removed fairly easily. The main brackets remain on the tractor. On the main bracket on the right side of the tractor there is a support that the control valve is mounted to. This support extends rearward to a convenient location for using the control valve. The control valve is a joy stick type and is very satisfactory in the application. From the control valve there are two hydraulic hoses that route back to the remote couplings that are part of the original tractor. The loader hoses are plugged into these. When using the three point hitch I have to tie the hoses aside to avoid the lift arms interferring. I seldom use the tractor for anything other than loader work so this is not a problem and could be corrected using 90 degree elbows.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
