Posted by Mr. Mayor on March 12, 2008 at 16:45:37 from (4.159.168.174):
I'm in the process of reassembling the governor/carb/throttle shaft on my H. I've done a number of C113's and C123's but this is my first H. Question is how free and loose does the throttle shaft have to move after it is assembled to the carb body? My experience tells me that anything connected to a flyweight governor should be absolutely free but I'm having a difficult time achieving that. The throttle shaft in the carb is new and moves very freely. I installed a new bushing in the end of the shaft housing that connects the carb to the governor and that long shaft moves freely in there too. I also checked the long throttle shaft between centers with a dial indicator and it is perfectly straight. When I attach the housing and shaft to the carb it takes some slight effort to operate the throttle when turning the long shaft from the governor end. I can loosen it up by sanding the area of the shaft that rides in the bushing but I'd rather not if some drag is normal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A City Guy's First Tractor - by Fred Hambrecht. After living in apartments in Atlanta for more years than I care to remember, the wife and I decided to move to the country. Humming "Green Acres is the place for me..." we purchased a 29 acre tract about 60 miles south of Atlanta. Next came the house, I could talk about that ordeal for another two weeks... But, I want to talk about my tractor! We didn't even own a lawnmower, and all of a sudden we had enough grass to feed all the starving children of the bovine world. Naturally, I talked
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.