Greg: I'm not much of a photo guy. Basically if you take Keith's photos and diagrams, all I did was replace the jack with the 1" fine thread bolt. I drilled a 1"+ hole through cross member where base of jack sits in his photo, put the head of the bolt against pulley putting it on. Taking it off, I used a 3/4" bolt 4" long in through the pulley and put head of 1" bolt against that.
Jim Becker and Pete suggest putting a 5/8" coarse thread bolt in threaded end of crank for pushing pulley back on. I had my pulley warm enough that it was just comfortable for bare hands. The crank was cold from unheated building and we had frost last night. When I consider the pressure I put on a 1-5/16" spanner wrench on the 1" fine thread, I don't think I'd want to try it with 5/8" coarse. I don't think 5/8" course would have taken the pressure.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.