Farmall & IHC Tractors Discussion Board |
Re: Re: Re: 184 cub smoking
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by MIKe on March 19, 2000 at 06:44:05 from (206.159.164.17):
In Reply to: Re: Re: 184 cub smoking posted by Denny on March 17, 2000 at 14:33:12:
Sounds like bad bearings on the PTO shaft or perhaps on the implements your driving.Yes the engine could be tired too.A common problem is the Mickey Mouse throttle cable.These things never hold the engines to the factory spec.I.E.2200 RPM unloaded(this is very important).I got creative and fabricated a clevis & rod arrangement on both my 154&184 which works great.If you need a place to start Central Tractor (1 888 8CT farm)sells a gas lever used on the H&M for about $30.00 Pt#4866-009 ,I made my own but this would work.Also the arm on the governor is usually broken ,if so you can braze a piece of 1/8 inch steel behind it and redrill the hole for the throttle cable or rod if you do the conversion. First though check those PTO bearings be aware that the shaft normally will not spin freely because the elect. clutch has a anti-coast brake built into it. MIKE
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|