Posted by Slappy on August 06, 2008 at 12:26:51 from (143.88.85.90):
Hi All,
I'm working on a 1950 M that was in very rough shape. The rear end was missing several parts and one was the PTO shifter rod. The parts manual shows three different PTO assemblies.
Two have PTO shifter arms that are close to the transmission case so that the shifter rod is more or less straight, terminating in a loop that the driver would grab onto to engage the PTO. I don't have this PTO style on my tractor.
I have the third PTO type. It has a shifter leaver that is further from the transmission casting and has a PTO shifter rod that is longer and bent back so it can attach to the shifter rod leaver under the shield at its lower end, and terminates under the driver's seat with a 90 degree bend - not the loop.
I've tried to get the correct shifter rod from my favorite salvage yard but they've sent the wrong style - twice. I finally just bought the round stock to make my own, and am wondering if anyone has a picture and or a few critical dimensions that might help me get the pattern right.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.