Posted by Tom Windsor on October 05, 2008 at 20:54:44 from (71.28.88.201):
I am back again. I found a couple I/H power units suitable to get me a good engine built. These units have the 4 cylinder continental engine in it. The power take off has several setups. Transmission and Clutch, Direct take off with no clutch. AND, direct take off with a hand operated clutch to either engage or disengage the matching PTO shaft. I want to end up with a unit that I can put a pulley on the PTO shaft and engage and disengage the clutch by hand.
I have seen a unit somewhere that had a starter on it. To do that, one has to have the bell housing and the flywheel to match along with the starter.
So, here is what I am fising for:
1. A source for the clutch and PTO shaft on the end of it that will bolt up to the bell housing that is on it.
2. And, Possibly, a different Bell housing for a starter with matching flywheel that bolts up all of #1.
I would e happy with #1 and estatic if I could find all of #2,
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.