Back in the day we pulled a #16 3x14 plow with a '54 SM that had 4 1/8" Fireraters. Most of our ground was Sable & Ipava loams which are fairly black ground. The Sable was especially hard pulling. We plowed 10" deep, tractor had duals on the land side, 8 weights on the furrow wheel & rear tires were full of calcium. 2nd gear was normal plowing gear & in places we would have to stop & shift to 1st gear. Also had a 450 with oversize pistons that we pulled a mounted 3x16" IH plow with. Tractor basically settup the same as the SM except the 450 had 15.5s. Other that a slight difference in ground speed in 2nd gear & being able to pull the TA back in the tough spots that two tractors pretty much ran together when plowing. In a 12 hr day the 450 might make another couple rounds
I have a SMTA that I bought to play with a few years ago. Tractor has 14.9s, 418" M&W power dome pistons, M&W crank, & M&W governor. I picked up a IH #60 4x14" last winter for it from an old timer who pulled the plow with a '52 SM on light soil about 6" deep. I haven't got a chance to use the plow yet but have reservations about the SMTA being able to handle it.
I wouldn't worry about not having draft control. I have been plowing since the late '50s & of all the tractors I have plowed with that had some sort of draft control, from the 450 up thru CIH Magnums & JD 20 & 40 series, I never did use it. Personally, I never could figure why someone wanted to raise their plow up when they hit a tough spot. Always figured the hard spots were the places that needed plowed the deepest. If your tractor won't pulla plow thru those spots you eithr needto gear down or get a bigger tractor or a smaller plow. JMO
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.