Posted by karl f on January 10, 2010 at 21:26:37 from (172.162.127.12):
In Reply to: Battery problem. posted by Bradford on January 10, 2010 at 17:03:12:
We are going through a situation at work with batteries. The corporate office and battery manufacturer have teamed up and determined our battery warranty rate was too high. They claim something like 30% of batteries warranteed test good. Now for consistency, all stores get a new hand held Midtronics tester that prints a pass/fail piece of paper including the voltage and CCA rating and CCA at time of test. The tester is a 4 or 500 dollar piece of technology that is supposed to be more accurate and reliable than a load tester. IF it was part of a test system with a load tester and built in charger with computer control, it could have the potential to solve all battery problems and concerns. Depending on the problem, it could be nothing more than a glorified multimeter! We have yet to see what happens, but some batteries have already passed that the customers swear were bad. It"s a learning curve right now, so we are as pleasant as possible and offer to take it back/exchange under warranty if it gives more problems. I have a gut feeling that the testers are calibrated in the battery mfg"s favor. And unfortunately, the cost of warranty-ing comes out of the store and the employee"s performance evaluation (chance of a raise).
Good habit to get into is ask to test every battery at time of sale, and ask how long it"s been since date of manufacture.
good luck with yours!
-karl f ps. I also concur those hand held "toasters" are not load testers.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fasteners: The Nuts and Bolts of Nuts and Bolts - by Curtis Von Fange. The nuts and bolts of nuts and bolts is an interesting and essential piece of knowledge that applies to our older tractors. An improperly torqued capscrew on an engine head or a shear bolt that is too hard on the driving shaft of a bushog can create havoc and make an expensive and uncalled for repair. Let’s examine the purpose and design of these fasteners in order to ensure their proper use. Fasteners are probably one of the aspects of mechanics that is given the least amount of thought.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.