Posted by Tom in Iowa City on March 31, 2010 at 10:37:04 from (173.21.35.134):
Well, after 3 months of working on the head, the manifold, the carburetor, etc., I tried for a start up last Monday and it fired off. Used the priming cups on top of the head to inject fuel right into the combustion chambers and it popped. Then, after a few more quarter turn cranks, it fired off and continued to run. Never found the timing marks on the flywheel, so I used this method: Got #1 on the combustion stroke, then placed a metal rod on top of the piston and jockeyed the bar up and down with the belt pulley to find very close to T.D.C. that way. Then, I placed a reference paint mark on the flywheel, through the 1 1/4 inch round hole on the bell housing, uncovered by removing a 2 inch by 3 inch oval plate. We timed the mag to have the spark retarded. Anyway, no kickback issues, yet at least. It ran good for about 2 to 3 minutes, then choked itself off. Did that again yesterday, and after it ran a similar amount of time, it quit, issuing forth quite a bit of black smoke. Appears to have been rich, with the carb leaking gas. Same thing again today. I rebuilt the carb with new choke shaft, new throttle shaft, new needle and seat, but used the old cork float. May be a float issue. I tried to solder a cracked brass float from my other carb, but I don't think it worked. Ordered a new brass float for about 17 bucks. At least I know it runs. Don't know anything about compression and a couple of the sleeves have some fairly serious pits, but it runs. The clutch is frozen to the flywheel. I understand I may be able to work on it without removing the engine, but if I have to resurface the face of the flywheel, I would guess I will have to pull the engine. Last September through December, I tore apart another 22-36 completely and think I will sandblast the empty main frame, paint and start rebuilding it with mostly its own parts, but with this engine that runs. The original tractor is a family relic from an Idaho farm and the running engine tractor came to me through eBay from Kansas. The engine on the Idaho tractor is stuck, has very bad rusting of the sleeves and a very poor head with no usable parts, save for maybe some of the guides. So, at least I have a start on the project. Thanks to all who have posted for me along the way with my questions. Tom
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
